DC-DC Buck Converter (LM2596) with Display
Model : MOD-00173
Supplier : Made in China
TechshopBD, Bangladesh
This is a DC/DC step-down voltage regulator that converts input voltage between 3.2V and 40V into a smaller voltage between 1.25V and 35V, capable of driving a 3A load with excellent line and load regulation.
In some projects, you might need different voltages (3-35V) for your devices. Without this kind of DC power source, you’ll find it time-consuming to buy a new one. The delay of project is so annoying. No worries! This module can accelerate prototyping, because you can get the voltage you need (such as 3.3V, 5V and 9V) as easy as blinking eyes.
- Input Voltage: 3.2V - 40VDC
- Output Voltage: 1.25V - 35VDC
- Max. Output Current: 3A
- Max. Efficiency: 92%
- Output Ripple: ≤100mV
- Switching Frequency: 65KHz
Login to
post comments.
Aashiqur | Nov 25,2017 at 01:47 PM
How do i regulate output voltage with this? Is there any potentiometer or something for regulation?
A.R | Nov 25,2017 at 04:01 PM
Hello, please see the picture carefully. There is a blue variable resistor on board.
Aashiqur | Nov 25,2017 at 04:59 PM
Got it.Thanks.
Eshad19 | May 7,2018 at 02:03 PM
My exact need is: 5v input 12v output ! So this could give me the solution right?
A.R | May 7,2018 at 03:28 PM
Never! You do not need buck. You need boost. https://www.techshopbd.com/product-categories/modules-98775/2863/dc-dc-boost-converter-xl-6009-with-display-techshop-bangladesh
Hussainshad013 | Jun 14,2018 at 12:49 AM
Is the onboard switch a momentary power switch for the module?
A.R | Jun 20,2018 at 11:06 AM
Input/output selector switch for display.
Ashraf3 | Oct 3,2021 at 03:11 PM
Is the output voltage dependent on input voltage or it will remain constant no matter the input voltage as long as input is higher than output?