DC 12V Solenoid Electric Door Lock

Model : MIS-00318

Supplier : Made in China

TechshopBD, Bangladesh


1 - 9

10 - 99
BDT919.66Save BDT 30.79

100 +
BDT907.30Save BDT 43.15

Green 21 Available

You may also be interested in

DC 12V Solenoid Electric Door Lock

Automatic electric door lock.Can be used as cabinet lock,locker locks,file cabinet locks ,luggage locks,electric locks,door locks,solenoid locks,drawer,newspaper boxes lock ,sauna lock,locker electromagnetic locks,electric locks,newspaper boxes,sauna electronics lock.


Note: This device runs on 12V DC. If you want to run it with a signal of lower voltage (e.g.: a 5V microcontroller like arduino), you'll need to also use the 12V Door Lock Driver


Bangla Turorial: click here

Product package contains only the door lock (without the door lock driver)

  • Voltage: 12VDC
  • Current: 0.8A
  • Size:54*41mm (L*W)
  • Latch telescopic length: 10mm
  • Energized forms: intermittent;
  • Unlocking time: 1S
  • continuously energized <10S;
  • Temperature: -40 C ~ +50 C
Login to post comments.
Btalha2 | Nov 10,2015 at 10:10 AM
It seems to be normally locked. I need something normally open.
Mahimrocky | Feb 11,2016 at 11:38 PM
12v dc not worked..
Baizedshuvo | Feb 16,2016 at 10:01 PM
Why not work? can you tell the details?
Mahimrocky | Jun 8,2016 at 01:01 PM
I try 12 v dc, and increase some volt. But it cannot unlock its self. It needs to push then its unlock. if i disconnect the its lock finely. I use lock driver with arduino. But same thing happen when i pass signal it cannot unlock need to push by hand. I think its locks problem. Any solution please..
FAHIM_REAZA | Jun 8,2016 at 03:18 PM
This problem occur due to insufficient current in "DC 12V Solenoid Electric Door Lock". Don't supply more than 12V to the "DC 12V Solenoid Electric Door Lock", it may damage the solenoid. Please insure at least 1.2A current.
Bobseee | Jul 20,2016 at 06:15 PM
Why 1.2A? Specification telling it require 0.35A. BTW, I need it within 10 days. does it will be available within said time?
Syket1212 | Nov 21,2016 at 01:12 AM
can i operate it with arduino by using relay
A.R | Nov 21,2016 at 10:27 AM
Tanvirjewel | May 31,2017 at 05:20 PM
i tried with 12v DC adopter...its not working
A.R | Jun 1,2017 at 10:17 AM
It needs minimum 800mA current. Make that sure.
Tanvir14ahmed | Oct 15,2017 at 11:36 PM
Will it work with "12V 5A Power Adapter" (Model : MIS-00395)
A.R | Oct 16,2017 at 09:41 AM
Yes it works.
Rashad900 | Oct 27,2017 at 12:07 PM
Can I alternate the orientation of the lock? Because I don't want the slopping edge oriented like this.
Specs says that: continuously energized <10S, will it damage if longer excitation is occured?
A.R | Oct 28,2017 at 09:38 AM
No.orientation should not be changed, energizing time should not be exceeded either.
Rashad900 | Nov 1,2017 at 09:50 PM
In your tutorial I saw the lock. That seems different from this. Will you send that lock if ordered? Why these locks are different shape?
A.R | Nov 2,2017 at 09:36 AM
Both are same. Wire colours only differ. Recently we have the one we used in tutorial in stock.
Rashad900 | Nov 2,2017 at 10:50 AM
I mean by different shape is top view are different. I can see it. it's confusing.
A.R | Nov 3,2017 at 07:54 PM
Picture changed. Thanks for bringing it to our knowledge.
Fueanta | Feb 19,2020 at 05:44 PM
Is it compatible with the following adapter?
A.R | Feb 20,2020 at 09:29 AM
[email protected] | Sep 22,2021 at 03:02 PM
Can you tell me the stroke force of this product.

Copyright © 2012-13 Techshop Bangladesh. All rights reserved.