1 Channel 5V Relay Module (DIP)

Model : MOD-00059

Supplier : Techshop Bangladesh

TechshopBD, Bangladesh


1 - 9

10 - 99
BDT82.21Save BDT 2.80

100 +
BDT81.10Save BDT 3.91

Red Out of Stock

You may also be interested in

On board 5V Relay

Here comes an on board 5V relay with necessery pinouts to free you from the hessel of figuring our the relay pins. Just get this board and interface it with your arduino or micrcontroller to experiment with AC loads.

Relay Specifications:

  • Model:SRU-05VDC-SL-C
  • Rated coil Voltage:5V DC
  • Operating Frequency:50/60HZ
  • Maximum Switching Voltage:250V AC, 30V DC. 
  • Nominal Current:10A at 125V AC and 10A at 30V DC
Login to post comments.
Saqib11 | Oct 16,2014 at 04:27 PM
I need 10 pieces of these ......
when it will be available ?????
Khalek0196 | Aug 28,2015 at 12:31 PM
Relay Module i need to this nx RFID Tags (Mifare 13.56 Mhz as many as users)
Maker1 | Jan 12,2016 at 09:24 PM
Can this hold 220 volts
A.R | Jan 13,2016 at 09:40 AM
Of course. Please see the specification and documents.
Firoz.071 | Jun 5,2016 at 12:35 AM
video is not available.
please update
FAHIM_REAZA | Jun 5,2016 at 06:41 PM
No video tutorial is needed to operate this simple "1 Channel 5V Relay Module". Use Vcc=5V and GND=0V. The "CH1" is the signal pin, use logical 1 (+5V) to operate the relay.
Moinucuet_86 | Sep 27,2019 at 11:54 AM
Aion_Zaman | Jun 12,2016 at 04:06 PM
what is the maximum current it can handle at 230?
FAHIM_REAZA | Jun 13,2016 at 11:47 AM
It is recommended to use maximum 7A with load.
Pollob | Aug 11,2016 at 07:15 AM
Please stock this type product
FAHIM_REAZA | Aug 11,2016 at 10:08 AM
Thanks for your comment. This is our concern now.
Pollob | Aug 27,2016 at 05:19 PM this product

FAHIM_REAZA | Aug 28,2016 at 09:53 AM
Dear, you can source all type of tech related products from international market via us. For sourcing a product from international market, please contact our sourcing department with your desired product link, through [email protected]
Thanks for with us.
Reddhi | Sep 23,2016 at 05:06 PM
Can i connect this relay with the main electricity of my house ?
A.R | Sep 24,2016 at 09:40 AM
It can be connected to 220V AC Line. Please see the tutorial in the documents section.
Simonn | Nov 15,2016 at 01:01 AM
ei relay module er relay tar height koto mm?
20mm or 15mm?
eta ki 6v relay diye 5v relay module bananu naki 5v relay diye?
its urgent plz
I want order 15pieces within today
A.R | Nov 15,2016 at 10:00 AM
This is 5V relay. 20mm at present but it is not always fixed. Same relay of other height is also available in the market and we often use those in this module.
Simonn | Nov 15,2016 at 12:24 PM
so ekhon ei module a jeta laganu oita 20mm.?
tahole amr box a jayga hobena bro, 15mm er same 5v relay module hobe?
A.R | Nov 15,2016 at 05:49 PM
না। এখন এই মডিউলে যেগুলো আছে সবই ২০মিমি।
Simonn | Nov 16,2016 at 02:53 AM
15mm relay diye module baniye deya jabe? 1st order a 20-30 piece nebo then aro nebo
A.R | Nov 20,2016 at 05:14 PM
We will let you know later. It depends on the availability of the relay.
A.R | Nov 28,2016 at 09:35 AM
Small relay is now available.
Kawkab_Ahasan | Nov 20,2016 at 11:03 AM
What is the switching time for this product?
Kawkab_Ahasan | Nov 20,2016 at 11:06 AM
i mean 5volt power dear koto millisecond pore switch on korbe?
A.R | Nov 20,2016 at 05:20 PM
Please see here.
Simonn | Nov 30,2016 at 01:35 AM
new module gular relay er size koto mm? sure hoye janan coz ami er age kine dhora khaisi then speedytech theke Chinese relay gula kinte hoise
A.R | Nov 30,2016 at 09:46 AM
দুইটাই আছে। আপনি অর্ডার করার পর কাস্টমার কেয়ার থেকে ফোন করলে কাইন্ডলি বলে দেবেন আপনাকে যেন অবশ্যই ১৫মিমিঃ পাঠানো হয়।
Simonn | Nov 30,2016 at 10:23 AM
ami ki amr email a 2ta module er couple 1ta pic pete pari?
Mdsheesh | Feb 26,2017 at 01:29 PM
Output e ki 3 volt DC motor switching kora jabe?
A.R | Feb 26,2017 at 02:55 PM
ভাই, এটা ৫ ভোল্ট রিলে মানে হল এটা সুইচিং করতে ৫ ভোল্ট দরকার। আপনি এর আউটপুটে কী লাগাবেন তার সাথে এর সুইচিং ভোল্টেজের কোনো সম্পর্ক নাই।
Mdsheesh | Feb 26,2017 at 04:25 PM
Relay এর মাধ্যমে একটি 3V মটর চালাতে চাই। সেটা কি এই রিলে দিয়ে সম্ভব ? এখানে লেখা আছে Maximum DC 30 V কিন্তু Minimum কত ভোল্ট চালানো যাবে ?
A.R | Feb 27,2017 at 09:56 AM
সম্ভব। সেক্ষেত্রে ৩ ভোল্টের বেশি দিতে হবে। ঠিক ঠিক তিন ভোল্ট দিলে ভোল্টেজ ড্রপ হবার সম্ভাবনা আছে।
Rahul7999 | Mar 15,2017 at 07:38 PM
is this NC or NO type relay? i need NC (normally closed) type
A.R | Mar 19,2017 at 03:20 PM
It has one NC terminal and one NO terminal.
Srkhanjewel | Aug 8,2017 at 12:44 PM
PIR sensore er shathe kaj korby?
A.R | Aug 9,2017 at 10:13 AM
Not directly. You have to use a logic level converter to convert PIRs 3.3V signal output to 5V as the relay module runs on 5V.

Copyright © 2012-13 Techshop Bangladesh. All rights reserved.