Bipolar Stepper Motor Driver

Model : MOD-00088

Supplier : Techshop Bangladesh

TechshopBD, Bangladesh


1 - 9

10 - 99
BDT390.91Save BDT 8.22

100 +
BDT387.64Save BDT 11.49

Red Out of Stock

You may also be interested in

Bipolar Stepper Motor Driver

This Bipolar stepper motor driver module is a combination of two ICs. L297 and L298. L297 stepper motor controller IC generatesfour phase drive signals for two phase bipolar stepper motors. L298 receives the signal and lets you rotate a bipolar stepper motor.

Input pins are given on the left side of the board. Using these pins you must connect the board to a micrcontroller or Arduino and send control signals.

This board can operate one Bipolar stepper motor at a time. Connect the wires of the  stepper motor to the connectors marked with A B C D. 


Login to post comments.
Jahangir03eee | Jan 1,2016 at 09:12 PM
Please insert a heat sink with L298. i found the motor & IC both got too much hoot please suggest
Prithul | Oct 13,2016 at 06:31 PM
Can you please provide information about the current control?
Himmat | Mar 1,2017 at 11:49 PM
Maximum voltage for stepper?
Max current rating?
Himmat | Mar 4,2017 at 04:16 PM
Maximum voltage as VS?
A.R | Mar 5,2017 at 11:53 AM
Amz72962 | Feb 17,2018 at 07:32 PM
I BOUGHT A DRIVER X DAYS AGO IT WAS WORKING PROPERLY AFTER FEW TEST I LEFT IT NOW THE DIRECTION PIN IS NOT WORKING CAN YOU REPLACE THE L297 chip of my driver?or there is no replacing ?or is there any other solution to it!
A.R | Feb 18,2018 at 11:41 AM
Hello, we have service warranty for our manufactured products like this one. Please bring the product to us. You can courier it to our office or bring it to us by coming personally.
[email protected] | May 1,2022 at 05:08 PM
Make it in stock plz asap

Copyright © 2012-13 Techshop Bangladesh. All rights reserved.