USBISP AVR Programmer

Model : PRG-00018

Supplier : Made in China

TechshopBD, Bangladesh


1 - 9

10 - 99
BDT386.36Save BDT 9.70

100 +
BDT382.48Save BDT 13.58

Red Out of Stock

You may also be interested in

USBISP AVR Programmer (CN)

These AVR programmers are based on  USBISP firmware and connect to your computer's USB port. This programmer is fully compatible with the following development board: 



And of course you can use this programmer for programming your other avr-development-board or a single avr-chip by connecting their VCC, GND, MISO, MOSI, SCK, RESET pins with this programmer. 

Login to post comments.
KhairulHasanmd | Feb 2,2016 at 04:01 PM
this is not USBasp programmer, This is USB ISP programmer and does not supported by AVRDUDE.
Mohiuddin.rafiul | Mar 29,2016 at 08:07 PM
Can it program pololu 3pi robot? which has ATmega328
Mushfiq.martinie.xen | May 12,2016 at 01:57 PM
can i use it with AVR Studio directly ?????
Mushfiq.martinie.xen | May 12,2016 at 01:57 PM
can i use it with AVR Studio directly ?????
FAHIM_REAZA | May 16,2016 at 10:20 AM
Yes, you can. For achieve this feature have to create and add an "External Tool" setting from the "AVR Studio".
Anindya11 | Sep 19,2016 at 08:30 AM
Can i program pololu 3pi robot with it?
Jahangir03eee | Feb 9,2017 at 05:37 PM
is it support 24C64 eeprom
NAIMHASAN | Feb 9,2017 at 09:12 PM
can I program atmega32a with this. do u give driver software for Windows with this. pls reply.
A.R | Feb 11,2017 at 10:27 AM
You can. Burner software is given in the documents section. This product is not made by us. This is made by us.
NAIMHASAN | Feb 14,2017 at 12:55 AM
thank u very much for reply.but firstly when I tried to go to the link of the burner soft that is given in the doc sec. it goes only to didn't dind any burner soft. when I plug the usbisp to my pc it detect the usb . but how to identify. by going through cmd . avrdude -c (what should I type next .should I type "usbtiny" or "avrisp" both doesn't to connect this with my pc. I have installed winavr.and I am using Windows 7 x64
A.R | Feb 14,2017 at 10:17 AM
Software is given in google drive. Please login to your google account.
Ahsanhabibanik1998 | Feb 19,2017 at 01:22 AM
Can you give me any Driver software link please !!
Thanks in advance.
Mamun1990 | Oct 7,2018 at 12:59 AM
Can I program ESP8266 MODULE ?
A.R | Oct 8,2018 at 09:26 AM
Sorry. Can't understand. This is an AVR programmer. What is the relationship of ESP8266 with this?
Iftiking | Dec 5,2018 at 01:30 PM
Is this support windows 10?
A.R | Dec 6,2018 at 09:37 AM
Abu_sufian | Mar 8,2019 at 02:11 PM
এটা দিয়ে কি সকল এভিআর মাইক্রোকন্ট্রোলার প্রোগ্রাম করা যায়? যেমন ATMEGA328p.
A.R | Mar 9,2019 at 05:39 PM
Alphazisan | Mar 23,2019 at 06:59 PM
what is difference between AVR Programmer
Model : PRG-00001 and this programmer??
A.R | Mar 24,2019 at 09:44 AM
PRG-00001 is much easier to use and that one has 1 year service warranty as that is manufactured by us.
Shahinahmed0177971 | Jun 27,2019 at 10:06 PM
এটা দিয়ে কি সকল এভিআর মাইক্রোকন্ট্রোলার প্রোগ্রাম করা যায়? যেমন ATtiny13
Mithun_K_Das | Mar 12,2020 at 08:58 PM
Kindly mention supported MCUs of this programmer.
A.R | Mar 15,2020 at 05:56 PM
Same as USBASP.
Mithun_K_Das | Mar 15,2020 at 07:45 PM
Can it work with 8051 series MCUs?
A.R | Mar 16,2020 at 10:51 AM
As per the resources we got, it can programme AT89S, AT90CAN and AT90S series. But the supplier didn't provide us any manual regrading how to do that.
[email protected] | May 10,2021 at 11:55 PM
Prblm: I have purchased an Arduino Uno but this need bootloader. I have seen that from youtube that it can be solved by burn bootloader in Atmega8pu microcontroller. To burn a bootloader i have to use pre-installed chip to burn my new Atmega8pu chip.

Q: will this device solve my Mentioned problem of bootloader burn?

Copyright © 2012-13 Techshop Bangladesh. All rights reserved.