Search

Port103Z- STM32 Development Board

Model : DEV-00027

Brand : Waveshare Electronics

Supplier : Waveshare Electronics, China

TechshopBD, Bangladesh

Pricing
Quantity
Price

1+
BDT1889.60BDT1114.86

Red Out of Stock

You may also be interested in

 
Summary:
ARM development board.

Port103Z is a STM32 development board that features a STM32F103ZET6 device as the microcontroller, supports further expansion with various optional accessory boards for your specific application. It is ideal for starting application development with STM32F family.

Note: Optional accessory boards are NOT included in the price.


What's On Board

STM32F103ZET6 development board on board resource

  1. MCU: STM32F103ZET6 from STMicroelectronics, incorporates the high-performance ARM® Cortex™-M3 32-bit RISC core operating at a 72 MHz frequency in LQFP144 package. The STM32F103ZET6 offers high-speed embedded memories(512KB FLASH, 64KB RAM), 12-bit ADC, 12-bit DAC, I2C, SPI, I2S, SDIO, USART, USB, and CAN.
  2. Onboard 3.3V regulator, AMS1117-3.3
  3. Power indicator
  4. LEDs: convenient for indicating I/O status and/or program running state
  5. Reset button
  6. User Buttons
  7. Joystick, 5 directions
  8. 8M crystal, enables the MCU run at 72M frequency by frequency multiplication
  9. 32.768K crystal (bottom side), for internal RTC with calibration
  10. Programming interface (JTAG/SWD), onboard 20-pin JTAG/SWD header
  11. USB connector, used for establishing USB communication between PC and the STM32 development board
  12. UART1 connector, supports ISP (In-System Programming) through UART1, as well as system signal output
  13. IO expander, all the MCU pins are accessible on expansion connectors for further expansion
  14. Power input/output header, 5V/3.3V, usually used for power output, or common ground with other user board
  15. 5V DC power jack
  16. Boot modes configuration: jumpers for selecting STM32 boot space
  17. Power supply switch, powered from 5V DC jack or USB connection
  18. USB enable jumper
    • Short the jumper to enable the PC auto detection while USB connecting
    • Open the jumper to disable
  19. VBAT enable jumper, powered from battery is available via this jumper, an external battery is required
  20. VREF jumper
    • Short the jumper to connect VREF+/VREF- respectively to VCC/GND
    • Open the jumper to connect VREF+/VREF- to other custom pins via jumper wires
  21. User LEDs jumper
    • Short the jumper to connect to I/Os used in example code
    • Open the jumper to connect to other custom pins via jumper wires
  22. User Buttons jumper
    • Short the jumper to connect to I/Os used in example code
    • Open the jumper to connect to other custom pins via jumper wires
  23. Joystick jumper
    • Short the jumper to connect to I/Os used in example code
    • Open the jumper to connect to other custom pins via jumper wires

 

Click here to know more about this product.

Login to post comments.
anon
Mahmud_yusuf | Aug 30,2016 at 10:21 PM
Is the JTAG programmer/debugger included in this package?
anon
A.R | Sep 3,2016 at 05:29 PM
Not included.


Copyright © 2012-13 Techshop Bangladesh. All rights reserved.